Dust
Collector
System
–
Owner
Manual
2 INTRODUCTION
This document describes the general requirements, engineering specifications and maintenance
needs of the Carbone Dust Collection System also referred to as DCS.
3 OPERATING CONDITION
The DCS is constructed to operate 24/7 at room temperature.
Its purpose is to catch carbon dust from at the source on ten (10) BUNG brush holder.
The DCS control panel was designed to be enslaved by the generator.
So when the generator is stopped (on purpose or for emergency / failure) the DCS will also stop.
The DCS will stop itself when full and has also a switch for Manual stop
4 CERTIFICATION
The vacuum efficiency and filtration area meet the HEPA/CE/UL/CSA standards.
The Dust Suction Shoe, the Brush Holders, and Brushes are made following the ISO 9001-2008
manufacturing standards.
5 WARRANTY
Vacuum
The Vacuum is covered by 1 years limited warranty on parts and Labor by MERSEN Canada Dn Ltée.
The Filter is covered by 2 years warranty by MERSEN Canada Dn Ltée.
Suction Nozzle & Piping
The suction nozzle and piping is covered by 1 year limited warranty on parts, for defects in material by
Mersen Canada Dn Ltée.
Brush Holders and Brushes
The brushes holders and brushes are not covered by warranty.
Summary of Contents for TransAlta
Page 1: ...DCS Owner Manual...
