MeshLinx MWI-5000 User Guide
MESHLINX CONFIDENTIAL
3
4.2.4.4
Update from via RedBoot
If the previous flash image is damaged, it may be necessary to revert to the last
known-good flash image via RedBoot.
Setup a TFTP server on either a Linux or Windows system and connect it to the
network.
Copy three image files (XXX_ixp425-le-gnu_waps.jffs2, XXX_ixp425-le-
gnu_rootfs.jffs2, and XXX_ixp425-le-gnu_kernel.bin, where XXX is the build
number) to the TFTP server directory (/tftpboot on Linux).
Reboot the AP and press Control-C immediately to get in the RedBoot screen
Type flash –l <local IP address> –h <TFTP server IP address>
-t XXX
( at the
RedBoot>
prompt) where local IP address is any static IP address
available on the same subnet with the TFTP server.
Once the firmware update is completed, the AP should automatically reboot itself.
The AP is now operational.
4.3 Web
Interface
The Web interface provides the simplest means for configuring and managing the
MWI-5000 System. You can access it through the wired Ethernet connection or the
