4
POLSKI
4. You can remove pillings from thin clothing by folding it in multi layers, and putting it on flat, stiff cardboard.
CLEANING THE FABRIC SHAVER
5. In case of clothing with pattern, move the shaver along the pattern line.
Turn off the shaver. Remove the blade guard (2). Remove the blades (3) (be careful! The blades are very sharp). Brush clean the blade
guard (2), blades (3), rotary shaft (4). Empty the knotting and pilling tank (7).
1. Safety cap
2. Blade cover
DESCRIPTION OF
THE DEVICE
falls into water, immediately remove the plug or adapter from the wall socket. Do not put
your hands in water when the machine is connected to the network. It must be checked by a
qualified electrician before using it again.
16. Do not allow the device or adapter to get wet. Where the device
19. Do not leave the device switched on or the adapter unattended when unattended.
or above the sink with water.
17. Do not hold the device or power supply with wet hands.
18. Turn off the device whenever you put it away.
15. When the appliance is used in the bathroom, remove the plug from the socket after use,
as the proximity of water is a hazard even when the appliance is turned off.
5. Power switch
6. Shaver body
14. Do not use the device near water, e.g. in the shower, in a bathtub
3. Blade group
4. Rotary shaft
7. Lint and pillings bin 8. Battery compartment
Remove the battery compartment cover (8). Remove old batteries. Insert new 1.5Vx2 AA batteries. Close the battery compartment cover.
1. Turn the shaver on.
3. Resisting lint can be removed by moving shaver crosswise and then lengthwise (in cross-pattern) on one, small fragment of clothes.
BATTERY CHANGE
BEFORE FIRST USE
USING THE FABRIC SHAVER
Open the battery compartment (8). Insert 2xAA batteries (battery not included). Close the battery compartment cover.
2. Place the clothes (fabric) on flat surface, smoothen the creasings and move the shaver forth and back along the fabric.
6. Empty the fluff container when it is 3/4 full.
10. Do not use the shaver on clothing that you are wearing, always take it off. It may cause
injury to the body or shaver.
13. Do not use the shaver for clothes made of silk, wool or linen. This can damage the
fabrics and destroy the shaver blades.
8. Straighten the fabric surface before using the shaver.
9. Do not dent the shaver into the fabric as this may damage the fabric.
7. Sediment on the inside and outside of the blade guard reduces shaving performance.
Clean the blade guard regularly with a brush. (No brush included)
11. Always turn off the shaver before connecting the device to the power supply or inserting
the battery.
12. Be careful not to use the shaver on buttons, zippers, applications, patches, stickers,
labels, abrasions, seams and joining elements.
Summary of Contents for MS 9610
Page 2: ...2 8 ...
