3
1.
Unscrew the grille retaining ring from motor shaft.
2.
Put the rear fan guard on the motor shaft and screw together with the grill retaining ring.
3.
Connect fan blade to motor shaft.
4.
Attach front fan guard and close the clips using appropriate screw to secure grille together.
a)This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not be made by children without supervision.
b) Children should be supervised to ensure that they do not play with the appliance.
c) If the supply cord is damaged, it must be replaced by the manufacture or its service agent or a similarity qualified
person in order to avoid a hazard.
4.
Technical Data
Supply Voltage 220-240 V
Frequency 50Hz
Power consumption 33W
Electrical protective class of the device II
Weight 1,7 kg
Height 48,5 cm
Width 34 cm
5
.
Operating Instructions
1.
Plug the power cord into suitable socket.
2.
Oscillation: To make the fan oscillate, push down the oscillation knob. To stop the fan head from
oscillating, pull up the oscillation knob.
3.
The fan is switch on using the push buttons on the base. 0 = Off, 1 = Low Speed,
2 = Medium Speed 3 = High Speed
CAUTION: Press only one speed control button at a time. Permanent damage to the
Switch housing may result if two or more of the buttons are pressed simultaneously.
1.
Before servicing the fan and after use, switch off the appliance and unplug from mains.
2.
Never immerse the appliance in water. To clean the appliance, wipe down with a damp cloth and then dry
carefully. Always isolate from mains power before cleaning.
6. Trouble shooting
The device does not start
• Not connected power cord - connect the power cord
• The switch is damaged - return the device to service
The device is running loudly or generating high vibrations
• Damaged cover - replace the cover
• Damaged engine – put the device into service
