3 Settings
33
3.1
Wi-Fi and network
The camera requires Wi-Fi to work. Therefore you need to configure Wi-Fi first.
•
Tap [Wi-Fi Network]
Alternatively, press long on the bottom area of the Wi-Fi icon in the status bar
NOTE:
If your network requires certificates, these must be installed
beforehand (see section 3.3).
Fig. 50: Detected networks (left: DC-CC, DC-CPB; right: DC-CC2)
You will be shown all detected networks. If no networks are found, there is no reception at
your location or the Wi-Fi has been disabled.
Fig. 51: Wi-Fi disabled and enabled (top: model DC-CC, DC-CPB, bottom: model DC-CC2)
Sometimes
hides the button to enable Wi-Fi.
•
Grab the hand icon
and move it to another place.
You can refresh the list of Wi-Fi networks manually, for instance, after changing your
location.
Fig. 52: Scan for Wi-Fi networks manually (model DC-CC und DC-CPB)
Summary of Contents for DC-CC
Page 8: ......
