38
Event Name:
Enter an event name, e.g. Motion Detection, to identify this configured event.
Select All:
24/7 continuous recording
Schedule Pattern:
User-defined time frame
Triggered by:
This describes the selection of trigger conditions which include:
Motion Detection:
Select the motion detection area(s) used for trigger condition. To enable and
configure the motion detection areas, go to
Motion Configuration
.
Digital Input:
Enable system to detect the DI (Digital Input) status as a trigger condition. For
more details about the DI setting, go to
DI/DO Setting
.
Manual Trigger:
Enable system to detect the user input action (press the alarm button,
on the
live view page).
Network Fail:
Enable system to detect the network connection status.
Periodically:
Enable the system to perform the set Action periodically
Tamper Detection:
Enable the event to detect the tampering event
Audio Detection:
Enable the event to detect the audio event
Action:
The selection of responding actions
Digital output:
Check the box to enable the digital output as a responding action. For detailed
configurations, go to
DI/DO Setting
.
Upload files to a server:
This sort of action contains 2 parts; selection of the destination and
selection of file type. The destination includes the local SD storage, the FTP server and the email
recipients. The file type includes snapshot image and video clip. For detailed configurations, go to
Event Server & Media
.
NOTE
The dependency of
Event Server
and
Media Type
is described as below.
-
When
Event Server
is either Samba or SD card, the selection of
Media Type
will be
either image or video
-
When
Event Server
is either Mail or FTP, the selection of
Media Type
will only be
image
