Structure of the control system:
LED Display:
Brake handbar
Function button
Power switch
Throttle button
LED Display
Speed
Multifunction
Gear
The unit display
Fault Display
Power
Power Switch:Long press the power button to turn on/off.
Function key:
A: Short press function key: Cycle to switch gears.
Beginner mode: Gear indicator is not displayed.
Normal mode: Gear indicator shows white.
Sports mode: Gear indicator shows red.
B: Shortly press the function key twice to turn on/off the headlights, and the taillights are always
on.
Accelerator: Press the acceleration button to start and accelerate.
Brake:Hold the brake handle to brake. Lightly step on the rear fender to assist the brakes.
Cruise mode: Keep the current speed for 6 seconds to enter the cruise mode.
Exit the cruise mode when pressing accelerator again or brake.
Pull up the lever while pressing down the rear wheel fender.
Raise the pole; Fasten the folding spanner; And use the folder fixing ring to fix the folder wrench.
Fix the brake lever with M5 hex wrench.
According to the shaking condition of the pole, properly adjust the folder screw.
Tighten handlebars(Pay attention to the direction of rotation when tighten).
1
2
3
4
5
A
A
C
C
E
E
B
B
D
D
2.2. Pre-assembly instructions
Instructions of Buttons
7
8
