4. Battery Instruction
13
14
The instruction shows how to charge and maintain the battery, some safety notices and the speci-
fication. Please use the battery properly according to this instruction to prolong the battery life and
its performance.
Battery Parameters
Battery Safety
Do not continue to use the battery when the following conditions occur:
● The battery of the electric scooter should be used only with local law. Only for professionals to
disassemble and maintain the battery.
● Odor or excessive heat; leak any substance; do not touch anything leaking from the battery.
● Do not let children and animals touch the battery. Must unplug the charger before installing the
battery or riding. In the case of charging, it is very dangerous to do anything related to electric
vehicles.
● If you want the electric scooter to run most efficiently, the battery must be charged and used within
the temperature range indicated in the battery specifications.
● Lithium batteries are considered dangerous and require local law to allow transportation.
● The battery contains dangerous substances. Please do not open the battery . Do not insert anyt-
hing into the battery.
● It is forbidden to charge a lithium battery that has been over-discharged. A battery that has been
over-discharged has a safety hazard and can only be scrapped.
Tip: When the internal temperature of the battery exceeds 45 °C, the battery is protected.
Do not charge the battery at high temperature (45 ° C) or Charge the battery in a high temperature
(40 ° C) environment.
Only use the original charging equipment to charge the electric scooter.
Charging step
● Open the charging port cover, Make sure the charging port is clean and dry.
● Connect the charger with the battery and the other end with power(100V-240V;50/60Hz), make
sure the charging indicator is on.
● When the indicator light on the charger changes, indicating that the charging process is normal,
otherwise check if the line connection is good.
● When the indicator on the charger has color change, it indicates that the battery has been filled to
99%, Please stop charging; long time over charge will affect the battery life
Tips
Remove the battery to open the silicone charging port, plug the charger DC plug into the battery charging
port; plug the power cord into the charger, then connect the other port to the socket (100V-240V; 50/60Hz),
and confirm the charger indicator is on normally.
Cover the charging port with the anti-dust cap in case some metal may touch the charging
port and bring short-circuit after charging finished.
Parameter
Name
3 months (full charge)
2A
6.4Ah
Store Time
（-
10
℃-
40
℃）
Initial Volume
Max Charging Current
0
℃-
35
℃
0
℃-
35
℃
42V
Working Temperature
Charging Temperature
Max Charging Voltage
Li-ion battery
3-4 hours
36V
Type
Parameter
Charging Time
Voltage
Name
Parameter
Name
Charging method 1
Charging method 2
Battery
interface
Charging
port
