10
11
Item Designation
Pump Type
Art.-No.
Number
15
Rotor assembly
power-X 6000
168/009147
1
Rotor assembly
power-X 10000
168/009148
1
Rotor assembly
power-X 14000
168/009149
1
16
O-ring 96 x 3
power-X 6000, power-X 10000
112/000030
1
power-X
14000
17
O-ring 105 x 3
power-X 6000, power-X 10000
112/000047
1
power-X
14000
18
Screw M 6 x 20
power-X 6000, power-X 10000
114/000079
4
power-X
14000
19
Screw Ø 3,5 x 13
power-X 6000, power-X 10000
114/000078
2
power-X
14000
20
Hose nozzle 1 1/4˝
power-X 6000, power-X 10000
104/003042
1
power-X 14000
GUARANTEE CONDITIONS
This pump comes with a
60-month
guarantee that is effective from the
date of delivery. The invoice will be the proof of the date. In case of
damages due to defects in material or manufacturing, we shall either
do a free repair during the guarantee period or replace the damaged part,
the choice being ours’.
Damages that occur due to installation and operating errors, lime deposits,
insuffi cient care, frost action, normal wear and tear or improper repair
attempts will not come under this guarantee. The guarantee will not be
valid in case of modifi cations to the pump, e.g. cutting off the line
connection or the line cord. We will not accept responsibility for
consequential damages resulting from breakdown of the pump or improper
operation.
When making use of the guarantee, please send us the pump, along with
the corresponding invoice, free of charge via the specialist dealer who sold
you the pump.
Waste disposal
waste disposal of electronic devices by the user in private households
of the EU
It is not allowed to dispose the product along with the regular waste
disposal, instead it has to be collected separately. It is your
responsibility to dispose and recycle the device in a proper place and
protect the environment through this. More information, where to
dispose your devices can be obtained at the local departments.
Assembly (see fi g. 5 - 8)
1.
Push the O-ring (16) onto the starting point on the motor housing (10).
2.
Carefully slide the rotor assembly (15) into the motor housing (10) and
twist the bearing cover so that the two holes fi t onto the pins on the
motor housing (10).
3.
Check whether the rotor assembly can be rotated easily.
4.
Check the position of the O-ring (16) on the motor housing (10).
5.
Put the pump housing (12) on the motor housing (10) and attach it
fi rmly and evenly with the 4 screws (18).
6.
Set the pump (10) into the base tray (2).
7.
Attach the upper shell (1) to the rear hook of the lower shell (2) and
lock it into the front fl aps.
8.
Insert the respective screen inserts into the openings on top (3) and on
the left (5) or on the front (8) and on the right (7).
Maintenance
In order to prolong the service life of your pump signifi cantly and to keep it
in sound operating condition, it is recommended to carry out maintenance
and cleanup regularly.
This can be done by everyone, quickly and easily.
See „Dismantling/
Assembly“
Servicing intervals
- In the beginning check proper performance of your pump every day.
If necessary, clean the fi lters.
- Since servicing intervals (complete cleaning) will vary depending on the
level of pond pollution, repeat the periodic service to your pump in
accordance with the pollution of the pond water .
Should you determine that there are
damaged or worn parts
, replace
them.
See „Spare parts“
Important! When used in calcareous water, the rotor assembly (15)
and the stainless steel can split tube in the motor housing (10) should
be cleaned at regular intervals.
Pump care in wintertime
Protect your pump from freezing-up!
Take the pump out of your pond in autumn.
Clean the pump completely according to the instructions.
During the winter months store the pump in a tank fi lled with water to
prevent the bearings from drying out.
Store the tank in a frostproof room.
Spare parts
To order spare parts, please indicate the pump type, the designation
and the Art.-No. from the table below
(see also fi g. 8)
.
Item Designation
Pump Type
Art.-No.
Number
1
Upper shell
power-X 6000, power-X 10000
104/003438
1
power-X
14000
2
Lower shell
power-X 6000, power-X 10000
104/003795
1
power-X
14000
3
Top screen insert
power-X 6000, power-X 10000
104/003721
1
power-X
14000
5
Left screen insert
power-X 6000, power-X 10000
104/003723
1
power-X
14000
7
Right screen insert power-X 6000, power-X 10000
104/003724
1
power-X
14000
8
Front screen insert power-X 6000, power-X 10000
104/003722
1
power-X
14000
9
Handle
power-X 6000, power-X 10000
104/003444
1
power-X
14000
11
Socket 1˝ - 1 1/4˝
power-X 6000, power-X 10000
104/000826
1
power-X
14000
14
Rubber lagging C3 power-X 6000, power-X 10000
104/003452
3
power-X
14000
12
Pump housing 1˝
power-X 6000, power-X 10000
104/003509
1
power-X
14000
13 Connection
fl ange power-X 6000, power-X 10000
104/003410
1
C3 2˝
power-X 14000
130-003447_04-08_power-X_BA.inddAbs2:10-Abs2:11 Abs2:10-Abs2:11
130-003447_04-08_power-X_BA.inddAbs2:10-Abs2:11 Abs2:10-Abs2:11
14.04.2008 9:40:26 Uhr
14.04.2008 9:40:26 Uhr
