3. Web-based Interface
42 User Manual
1. Wait about 20~60 seconds until the file is successfully updated. Once the update is completed,
the browser will show a message reads “Firmware update successful”. Then it will take 60 seconds
to restart the camera.
2. The utility will automatically go back to live view screen after firmware has been updated
successfully.
You can also perform these tasks on the
Firmware
page:
Restart camera:
Restart the camera. This will cause all streams to disconnect.
Factory Default:
Reset all of the camera settings to the defaults, except network settings. After
you confirm to reset, the camera will reset and restart automatically. When complete, you will
return to the live view page.
Hardware Factory Default:
Reset all of the camera parameters to the defaults, including the
network settings.
3.4.4 User Management
The
User Management
page allows you to manage user accounts and access privileges.
