ENGLISH
The meaning of the error code on the screen and how to deal with it
Cleaning
•
Before cleaning, remove the products from the device and remove the plug from the power supply. Only clean
with a slightly damp cloth, if necessary a non-aggressive cleaning agent can be used. After cleaning, always dry
all wet surfaces with a dry cloth.
•
Never use sharp or abrasive products to clean the device.
•
Defrost the cool box: frost can settle on the evaporator or inside of the cool box due to humidity, this can reduce
the cooling capacity. The cool box must be defrosted in time. As follows
•
Take the products out of the cool box
•
Switch off the device
•
Open the lid
•
Sweep up the melt water or drain the melt water through the plug.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means
that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment. For further information, please contact your local
or regional authorities. Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MCCHD 33, MCCHD 45 & MCCHD 60 applies all basic
requirements and other relevant regulations listed in the European directive for electromagnetic compatibility
(2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact
the adress listed on the backside of this manual
