15
Visual inspection:
Are tank [1], pump [2], hose [3], shut-off valve [4] and spray wand [8]
with elbow [22] and nozzle [16] undamaged?
(Figures 1, 3, 18)
+
Pay special attention to the connections between the tank – hose and the hose –
shut-off valve and to the condition of the pump threading and spray wand.
No leaks:
Pump up the empty device to 2 bar
(Fig. 10).
► The pressure must not decrease more than 0.5 bar within 30 minutes.
Function:
Pull up the piston pressure gauge [10]
(Fig. 4)
► The pressure must dissipate.
+
Using the lock [40] the lever on the shut-off valve [4] can be locked and unlocked.
Unintentional spraying is prevented after locking. (Fig. 12)
► If required, reset the lock [40] and activate the shut-off valve [4].
(Fig. 12)
► The shut-off valve must open and close.
1. Fasten the carrying strap [7] on the tank [1]
(Fig. 2)
2. Push the hose [3] with the discharge filter [6] into the tank and secure it with the cap nut
[9].
(Fig. 3)
3. Push the tube [3] into the shut-off valve [4] and secure it with the cap nut [9].
(Fig. 3)
4. Screw the spray wand [8] onto the shut-off valve [4]
(Fig. 3)
5. Srew the elbow [22] onto the spray wand [8]
(Fig. 3)
Tank [1] with pump [2], hose [3] with discharge filter [6], shut-off valve [4], instructions
for use [5], carrying strap [7] and spray wand [8], elbow [22], cap nut [9].
(Fig. 1)
Type of device
3237FP
3237P
3278P
Max. filling amount
5 l (1.1 gal)
8 l (1.8 gal)
Total contents
6.9 l (1.5 gal)
10 l (2.2 gal)
Max. spraying pressure
3 bar (43.5 psi)
Max. operating temperature
30 °C (86 °F)
40 °C (104 °F)
Weight when empty / Gross weight max. 1.7 / 6.7 kg (3.8 / 14.8 lb) 2.9 / 10,9 kg (6.4 / 24 lb)
Material of tank
polyethylene
Spray wand
brass
plastic
Where device is carried
on the side
Technical residual quantity
< 0.04 l (< 0.01 gal)
Max. volume flow
1.0 l/min (0.22 gal/min)
Recoil force
< 5 N
+
You will find the illustrations referred to above in the pages 3 – 5 of these
instructions for use.
Scope of delivery
Technical data
Table 1
Assembly
Checks
EN ENGLISH
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
