13
Devices may not be used for spraying plant protection liquids.
Have damaged parts or parts that do not work properly repaired immedia-
tely by our customer service department or by service partners authorized
by us.
Avoid ignition sources in the environment if you spray combustible liquids.
Do not allow the device to remain under pressure and/or exposed directly
to sunlight. Make certain the device is not heated beyond the maximum
operating temperature
(→ Table 1 below).
Never blow through the nozzles or valves with your mouth.
Use only spare and accessory parts from MESTO.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded
(→ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pres
-
sure in the tank to dissipate completely
(→ Section „After Use“, Section 1).
Tank [1] with pump [2], shut-off valve [3], hose [4], instructions for use [5], spray wand [6]
(Fig. 1)
You will find the illustrations referred to in the text on pages 2 – 5 of these Instruc-
tions for Use, as well as on the insert.
+
Table 1
Technical data
Device family
INOX SUPER EXTREME
Type
3615S, 3615SE
Max. filling amount
10 l
Total contents
13 l
Max. spraying pressure
6 bar
Max. operating temp-erature
50 °C
Weight when empty
5,7 kg
Material of tank
Stainless steel with polyethylene inner tank
Where device is carried
Manual
on the back (optional accessories7121M)
Technical residual quantity
0,03 l
Max. volume flow
4,52 l/min
Recoil force
< 5 N
Scope of delivery
GB
IRL
AUS
USA
NZ
CDN
IND
