16
4. If the spraying pressure decreases more than 0.5 bar from the optimum level, pump
some more.
,IOLTXLGPL[HGZLWKDLUHPHUJHVIURPWKHQR]]OHWKHWDQNLVHPSW\
1. Hang the device over your shoulder.
)LJ
7RSUHYHQWGULSSLQJKROGWKHVSUD\ZDQGXSZKHQ¿UVWVSUD\LQJDQGDFWLYDWHWKH
VKXWRIIYDOYHXQWLOQRPRUHOLTXLGPL[HGZLWKDLULVHPHUJLQJIURPWKHQR]]OH
2. Activate the shut-off valve [4]
)LJ
Ź 6SUD\LQJPD\QRZEHJLQ
0DNHFHUWDLQWKHRSWLPXPVSUD\LQJSUHVVXUHLVVHWĺ7DEOHRQWKHSLVWRQSUHVVXUH
gauge [10]
)LJ
.
Spraying pressure
6SUD\LQJUDWHZLWKÀDWMHWQR]]OHRULJLQDOHTXLSPHQW
1.5 bar
0.56 l/min
2.0 bar
0.64 l/min
3.0 bar
0.78 l/min
Table 2. Linear dependence: spraying rate and spraying pressure
Making preparations
Observe the instructions in the section entitled „Safety“.
The device must be in an upright position.
,I¿OOLQJWKHWDQNIURPDZDWHUOLQHHQVXUHWKDWWKHOLQHRUDKRVHGRHVQRWSURMHFW
into the tank.
1. Pull up the red button on the piston pressure gauge [10] until all excess pressure is
released from the tank
)LJ
2. Press the piston rod with handle [11] down and turn it counterclockwise
Ź
7KHSLVWRQURGZLWKKDQGOHLVORFNHG
)LJ
3. Unscrew the pump [2] from the tank.
)LJ
:HUHFRPPHQG\RXPL[WKHVSUD\LQJOLTXLGLQWKHGHYLFHRUSUHPL[LWLQDQH[WHUQDO
WDQN)LOOWRZLWKZDWHUSRXULQWKHVSUD\LQJDJHQWDQGWKHQDGGPRUHZDWHUXQWLOIXOO
4. Add the spraying liquid to the tank [1]
)LJ
&KHFNWKH¿OOLQJOHYHOZLWKWKHVFDOH>@RQWKHWDQN
)LJ
6. Screw the pump [2] into the tank.
)LJ
7. Press the piston rod with handle [11] down and turn it counterclockwise.
)LJ
Ź
7KHSLVWRQURGZLWKKDQGOHLVXQORFNHG
)LJ
8. Generate the desired pressure
ĺ7DEOH
in the tank
)LJ
.
7KHPD[LPXPSUHVVXUHVKRXOGQRWH[FHHGEDUUHGOLQHRQWKHSLVWRQSUHVVXUH
JDXJH)LJ,IWKHPD[LPXPSUHVVXUHLVH[FHHGHGWKHVDIHW\YDOYHZLOOHQJDJH
DQGUHOHDVHWKHH[FHVVSUHVVXUH
9. Press the piston rod with handle [11] down and turn it counterclockwise
)LJ
Ź
7KHSLVWRQURGZLWKKDQGOHLVORFNHG
Spaying
Observe the instructions in the section entitled „Safety“.
Operate the device only while it is vertical or suspended upright and nearly
vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Observe the instructions of the spray product manufacturer!
GB
IRL
AUS
USA
NZ
CDN
IND
