23
English
WARNING
●
For intermittent operation, Set the stapling
operation switch to FULL SEQUENTIAL
ACTUATION MECHANISM (Stapling operation
indicator is light in blue.) (i.e. Set to SINGLE
ACTUATION MECHANISM.)
●
To avoid double
fi
ring or accidental
fi
ring due
to recoil.
1)
Set to FULL SEQUENTIAL ACTUATION
MECHANISM.
2) Pull the trigger rapidly and
fi
rmly.
Set the stapling operation switch to FULL
SEQUENTIAL ACTUATION MECHANISM
(Stapling operation indicator is light in blue.)
Position the staple outlet on the workpiece with
fi
nger o
ff
the trigger.
Depress the push lever
fi
rmly until it is completely
depressed.
Pull the trigger to drive a staple.
Remove
fi
nger from the trigger and lift the tool o
ff
the wood surface completely.
To continue stapling in a separate location, move the
stapler along the wood, repeating steps – as
required.
NOTE
Operations and should be done within
4 seconds of each other. If more than 4 seconds
pass after , the Stapler will not work properly. If this
happens, retry from .
Push lever
Trigger
Stapling operation switch
Stapling operation
indicator (Light in blue)
(2) Continuous operation (Push lever
fi
re)
Using CONTACT ACTUATION MECHANISM
WARNING
●
To avoid double
fi
ring or accidental
fi
ring due
to recoil.
1)
Do not press the stapler against the wood
with excessive force.
2)
Separate the stapler from the wood as it
recoils after stapling.
Set the stapling operation switch to CONTACT
ACTUATION MECHANISM (Stapling operation
indicator is blink in blue.)
Pull the trigger with the Stapler o
ff
the workpiece.
Depress the push lever against the workpiece to drive
a staple.
Move the Stapler along the workpiece with a
bouncing motion.
Each depression of the push lever will drive a staple.
As soon as the desired number of staples have been
driven, remove
fi
nger from the trigger.
NOTE
Operations and should be done within
2 seconds of each other. If more than 2 seconds pass
after , the Stapler will not work properly. If this
happens, retry from .
Stapling operation switch
Stapling operation
indicator (blink in blue)
Previously pull the trigger
000Book̲N1804DA̲metabo.indb 23
000Book̲N1804DA̲metabo.indb 23
2020/11/04 20:23:43
2020/11/04 20:23:43
