19
English
ABOUT REMAINING BATTERY INDICATOR
You can check the battery’s remaining capacity by
pressing the remaining battery indicator switch to light the
indicator lamp. (Fig. 18, Table 8)
The indicator will shut o
ff
approximately 3 seconds after
the remaining battery indicator switch is pressed.
It is best to use the remaining battery indicator as a
guide since there are slight di
ff
erences such as ambient
temperature and the condition of the battery.
Also, the remaining battery indicator may vary from those
equipped to a tool or charger.
Display panel
Remaining battery
indicator lamp
Remaining battery
indicator switch
Fig. 18
Table 8
State of lamp
Battery Remaining Power
Lights ;
The battery remaining power
is over 75%.
Lights ;
The battery remaining power
is 50% – 75%.
Lights ;
The battery remaining power
is 25% – 50%.
Lights ;
The battery remaining power
is less than 25%.
Blinks ;
The battery remaining power
is nearly empty. Recharge the
battery soonest possible.
Blinks ;
Output suspended due to high
temperature. Remove the
battery from the tool and allow
it to fully cool down.
Blinks ;
Output suspended due to
failure or malfunction. The
problem may be the battery so
please contact your dealer.
As the remaining battery indicator shows somewhat
di
ff
erently depending on ambient temperature and
battery characteristics, read it as a reference.
NOTE
Do not give a strong shock to the switch panel or
break it. It may lead to a trouble.
00Book̲SB3608DA̲metabo.indb 19
00Book̲SB3608DA̲metabo.indb 19
2022/08/02 23:45:58
2022/08/02 23:45:58
