background image

Before a long period of storage the machine should be cleaned and all malfunctions should be 
repaired. Protect the machine against weather conditions. The machine should be stored in the 
unfolded position on a level, hard surface.

9.

        

   RESIDUAL RISKS

 

 

9.1

DESCRIPTION OF RESIDUAL RISKS

The residual risk results mostly from improper behaviour of the operator caused by lack of 

knowledge or attention. The highest residual risk occurs in the following situations:

the   machine   is   operated   by   minors   or   persons   who   are   unfamiliar   with   the   operating 
instructions,

the machine is operated by persons under the influence of alcohol or other intoxicants,

the machine is used for purposes other than specified in the operating instructions,

a person is present between the tractor and the machine with the tractor's engine running,

bystanders, especially children are present near the working machine,

the machine is cleaned while working,

manipulation of the moving elements while the machine is working,

checking of the machine's technical condition.

While presenting the residual risk the machine is treated as designed according to the state 

of knowledge in the year of its manufacture and maintaining the basic OH&S rules.

9.2

EVALUATION OF THE RESIDUAL RISK

If the following guidelines are adhered to the occurrence of residual risk may be minimised:

always follow the safety regulations described in the operating instructions,

read and fully understand the operating instructions,

keep your hands out of hazardous spaces;

it   is   forbidden   to   operate   the   machine   in   the   presence   of   bystanders   and   in   particular 
children,

maintenance and repair of the machine may only be performed by trained personnel,

the machine may only be operated by persons who were trained in its operation and have 
familiarised themselves with the operating instructions,

the machine is protected against access by children,

the   machine   is   operated   by   persons   in   good   physical   condition   who   are   not   under   the 
influence of any intoxicants.

WARNING

!

The residual risks are present when the listed rules and indications are not followed.

16

Summary of Contents for KRUK U-740
























Reviews: