Table of contents:
page
CE DECLARATION OF CONFORMITY
NAMEPLATE
IDENTIFICATION DATA
1.
INTRODUCTION................................................................................................................................6
2.
INTENDED USE..................................................................................................................................6
2.1
OPERATION ACCORDING TO THE INTENDED USE
3.
USER SAFETY.....................................................................................................................................7
3.1
GENERAL SAFETY REGULATIONS
3.2
MAINTENANCE AND SERVICING
3.3
TRAVELLING ON PUBLIC ROADS
3.4
SAFETY SIGNS
4.
DISMANTLING AND DISPOSAL...................................................................................................11
5.
LIGHT SIGNALS (OPTIONAL)......................................................................................................11
6.
MACHINE DESIGN..........................................................................................................................12
6.1
TECHNICAL CHARACTERISTICS OF THE KRUK U-710 AND U-710/1 CULTIVATORS
7.
DELIVERY AND LOADING ON MEANS OF TRANSPORT......................................................13
8.
OPERATION AND USE....................................................................................................................13
8.1
PREPARATION OF THE MACHINE
8.2
COUPLING THE MACHINE TO THE TRACTOR
8.3
MACHINE ADJUSTMENT
8.3.1 ADJUSTMENT OF THE HARROW DISKS' WORKING DEPTH
8.3.2 WORKING DEPTH AND TINE ANGLE ADJUSTMENT
8.4
OPERATION OF THE MACHINE
8.5
LUBRICATION AND STORAGE
9.
RESIDUAL RISKS............................................................................................................................16
9.1
DESCRIPTION OF RESIDUAL RISKS
9.2
EVALUATION OF THE RESIDUAL RISK
10.
WARRANTY CONDITIONS AND WARRANTY SERVICES.....................................................17
WARRANTY CARD
COMPLAINT CALL
SERVICE LOG
11.
LOCATION OF THE MACHINE'S CENTRE OF GRAVITY.....................................................17
12.
STABILITY OF THE UNIT CONSISTING OF THE TRACTOR AND CULTIVATOR...........17
13.
PARTS CATALOGUE......................................................................................................................22
13.1 USING THE PARTS CATALOGUE
13.2 ORDERING PARTS
5
