INSTRUCTION MANUAL
–
T229, T241 FRONT LOADER
29
Stability of the system is ensured when the following condition is fulfilled:
where:
−
P - weight (kg) of tractor with boom,
−
N - weight (kg) of accessories with max. load,
−
M - weight (kg) of rear counterweight,
−
G - rear axle load (kg) with the device for fitting work tools mounted
and the boom in the most advanced position (without rear counterweight),
−
b
–
horizontal distance (mm) of the front axle centre from the centre of gravity of the
work tool,
with load, in the most advanced position,
−
l
–
horizontal distance (mm) of the rear axle centre from the centre of gravity of the rear
counterbalance,
−
L
–
wheelbase (mm).
Verification of the stability conditions is to be performed by authorised service centres
of the dealer.
The user may verify the stability conditions by weighing the tractor at maximum load with
full equipment twice.
2.4 Detaching from the Tractor
Make sure that no bystanders, especially children, are present in the Loader storage area
and its immediate vicinity.
Check the stability of the system before loading operations with the
maximum load capacity.
The Loader is to be detached from the tractor by a single operator
without the aid of other people.
It is recommended that an employee of an authorised service centre of
the dealer or an experienced operator should be present during the first
time the Loader is attached and detached to/from the tractor.
WARNING
Summary of Contents for T229
