Disposal, Recycling of old equipment
MRA - Series | Version 1.07
9
9.2 Maintenance of the machine
If the notching machine does not work properly, contact
a dealer or our customer service. The contact details can
be found in chapter 1.2 Customer Service.
10 Disposal, Recycling of old
equipment
In the interests of the environment, care must be taken to
ensure that all components of the machine are disposed
of in the proper and approved way.
10.1 Decommission
Disused devices must be taken out of service immedi-
ately in order to prevent later misuse and endangering
the environment or people.
- If necessary, disassemble the machine into manage-
able and usable components and components.
- Feed the machine components to the appropriate dis-
posal channels.
10.2 Disposal of lubricants
The disposal instructions for the lubricants used are pro-
vided by the lubricant manufacturer. If necessary, ask for
the productspecific data sheets.
11 Spare parts
11.1 Ordering spare parts
The spare parts can be obtained from the dealer or di-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service.
Specify the following key data when ordering spare
parts:
- Device type
- Serial number
- Lot
- Description
- Desired shipping method (post, freight, sea, air, ex-
press)
- Delivery address
Spare parts orders without above given information can
not be considered. If the shipping method is missing,
shipping will be at the discretion of the supplier.
Information on the device type, article number and year
of manufacture can be found on the type plate, which is
attached to the device.
Example
The eccentric for the Pipe notcher MRA 2 must be or-
dered. The eccentric has the number 8 in the spare parts
drawing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (eccentric) and marked
positon number (8) to the dealer or spare parts depart-
ment and provide the following information:
- Type of device:
Pipe notcher MRA 2
- Item number:
3772992
- Drawing number:
- Position number:
8
DANGER!
- Maintenance and repair work may only be carried
out by qualified personnel.
- Only use original spare parts.
NOTE!
Using non-approved spare parts voids the manufactu-
rer's warranty
DANGER!
Risk of injury due to incorrect spare
parts!
The use of incorrect or faulty replacement parts can
be dangerous to the operator and cause damage and
malfunction.
- Only use original spare parts from the manufacturer
or replacement parts approved by the manufacturer.
- In case of doubt, always contact the manufacturer.
