6
SSG 12 | Version 2.02
Technical Data
4
Technical Data
4.1 Table
5
Transport, package and storage
5.1 Delivery and Transport
Check the machine on delivery for any visible transpor-
tation damage. If you notice any damage to the device
please report this immediately to the carrier or dealer.
5.2 Packaging
All packaging materials and packing aids used for the hy
-
draulic workshop press are suitable for recycling and
must always be disposed of using material-based recy-
cling systems.
Packaging materials made of cardboard must be shred-
ded and disposed of as part of waste paper recycling.
The foils are made of polyethylene (PE), padding is
made of polystyrene (PS). Dispose of these at a recy
-
cling center or hand them over to the relevant waste dis
-
posal company.
5.3 Storage
Store the device in a dry, clean, dust-free and frost-free
environment. It must not be placed in a room with highly
oxidising chemicals.
Also, all bare metal parts must be greased against corro
-
sion.
6
Description of the device
6.1 Illustrations
Fig. 1: Description of the device
1 - Rubber handle for pressure arm
2 - Lever
3 - Housing
4 - Steel cable
5 - Upsetting jaws
6 - Cover for compression jaws
6.2 Scope of delivery
- Basic machine
- Stretching jaws
- Compression jaws
6.3 Accessories
- Compression jaw SET für SSG 12
Item number: 3776104
- Stretching jaw SET für SSG 12
Item number: 3776105
7
Operation
Type
SSG 12
Max. sheet thickness
1,2 mm
Throat
25 mm
Length
150 mm
Width / Depth
50 mm
Height
140 mm
Weight
5,5 kg
DANGER!
- Always assemble the Compression jaw and Stret
-
ching jaw correctly on the body of the device.
Wear Protective gloves
Wear Protective clothes!
