Cleaning, maintenance and service/repair
SSG 12 | Version 2.02
7
7.1 Structure and function
This machine consists of a body part and the upsetting
and stretching jaws together. The body of this machine is
made of high quality cast steel, with a high strength and a
good stability. The upsetting and stretching jaws are
made of chrome steel with very high hardness and tough
-
ness. The upsetting jaws are used to form external radii
and the stretching jaws are used to form internal radii.
7.2 Operation and adjustment
Please make sure that the jaws are properly attached to
the body of the machine and that the body part is fixedly
mounted on a stand. The opening and closing of the tool
teeth is only possible by pressing the handle no. 13 (see
exploded view). Insert the sheet to be processed in the
middle of the jaws and press the handle No. 13
Note: The work carried out should be carried out within
the max. Capacity.
8
Cleaning, maintenance and service/
repair
8.1 Cleaning
Clean the machine after each use.
Do not remove metal or scrap with bare hands, but use
safety gloves to prevent cuts.
Clean all painted surfaces with a soft, damp cloth.
Never use solvents to clean plastic parts or painted sur
-
faces. A surface release and consequential damage may
occur.
8.2 Repair
As a result of wear and tear, it may happen that main
-
tenance work must be carried out on the machine.
DANGER!
CRUSHING! When upsetting and stretching is
always to make sure that your own security is given.
There are crushing hazards on upper limbs.
Tips and recommendations
To ensure that the machine is always in good opera
-
ting condition, regular care and maintenance work
must be carried out.
WARNING!
Danger due to insufficient qualifica
-
tion of persons!
Insufficiently qualified persons can not assess the
risks associated with repair work on the upsetting
and stretching equipment and expose themselves
and others to the risk of serious injury.
- All maintenance work should only be carried out by
qualified persons.
NOTE!
After care, maintenance and repair work, check that
all panels and guards are correctly mounted on the
upsetting and stretching equipment and that no tools
are left inside or in the working area of the upsetting
and stretching equipment.
Damaged protective devices and parts of the device
must be repaired or replaced as agreed by a recogni
-
zed specialist workshop.
NOTE!
Oil, grease and cleaning agents are hazardous to the
environment and must not be disposed of in waste
-
water or normal household waste. Dispose of these
funds in an environmentally friendly way. The
cleaning cloths soaked in oil, grease or detergent are
easily combustible. Collect the cleaning rags or
cleaning wool in a suitable, closed container and dis
-
pose of them in a manner suitable for environmen
-
tally-friendly disposal - do not dispose of with
household waste!
Wear safety gloves!
Wear Protective clothes!
ACHTUNG!
Repairs or maintenance may only be carried out by
qualified and trained specialist personnel.
