8
SSG 12 | Version 2.02
Disposal, recycling of old equipment
9
Disposal, recycling of old equipment
In your own interest and to protect the environment make
sure that all machine components are exclusively dispo
-
sed of in as intended and permitted.
9.1 Decommission
Disused devices must be taken out of service immedi-
ately in order to avoid later misuse and endangering the
environment or people.
- remove all environmentally hazardous processing ma-
terials from the used machine.
- if necessary, disassemble the machine into assem-
blies and components that are easy to handle and suit-
able for recycling.
- The machine components and processing materials
must be disposed of us-ing the intended disposal me
-
thods.
10 Spare parts
10.1 Ordering spare parts
The spare parts can be obtained from the dealer or di
-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service.
Specify the following key data for inquiries or when orde
-
ring spare parts:
- Device type
- Article number
- Position number
- Year of manufacture
- Quantity
- Desired shipping type (post, freight, sea, air,
express)
- Shipping address
Spare parts orders without the aforementioned data can-
not be taken into account. The supplier shall deter-mine
the shipping type if no relevant data was provided.
Information about the device type, item number and year
of manufacture can be found on the type plate. The type
plate is mounted on the device.
Example
The lever for theCompressing and stretching machine
SSG 12 must be ordered. The lever has the number 13
in the spare parts drawing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (lever) and marked po
-
siton number (13) to the dealer or spare parts depart
-
ment and provide the following information:
- Maschinentyp: Compressing and stretching ma
-
chine SSG 12
- Item number: 3776102
- Drawing number: 1
- Position number: 13
Item number of your device:
Compressing and stretching machine SSG 12: 3776102
DANGER!
For maintenance work, please contact your nearest
metalworking dealer. Please write down the follo
-
wing information from the machine or the operating
instructions in advance to help you with your pro
-
blem in the best possible way:
- Model of the machine,
- Serial number of the machine,
- Exact error description
DANGER!
Risk of injury caused by the use of
incor-rect spare parts!
The use of incorrect or faulty spare parts may cause
risks for operating staff and damage as well as mal-
functions.
- Exclusively genuine spare parts made by the man-
ufacturer or spare parts authorized by the manufac-
turer shall be used.
- Always contact the manufacturer if you are unsure.
NOTE
The manufacturer warranty shall be rendered void in
the event of a use of unauthorised spare parts.
