Spare parts
SSG 16 | Version 2.01
11
11 Spare parts
11.1 Ordering spare parts
The spare parts can be obtained from the dealer or di-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service.
Specify the following key data for inquiries or when orde-
ring spare parts:
- Device type
- Article number
- Position number
- Year of manufacture
- Quantity
- Desired shipping type (post, freight, sea, air, ex
-
press)
- Shipping address
Spare parts orders without the aforementioned data can-
not be taken into account. The supplier shall deter-mine
the shipping type if no relevant data was provided.
Information about the device type, item number and year
of manufacture can be found on the type plate. The type
plate is mounted on the device.
Example
The wheel for theCompressing and stretching machine
SSG 16 must be ordered. The wheel has the number 47
in the spare parts drawing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (wheel) and marked po-
siton number (47) to the dealer or spare parts depart-
ment and provide the following information:
- Type of device: Compressing and stretching ma
-
chine SSG 16
- Item number: 3776103
- Drawing number: 1
- Position number: 47
Item number of your device:
Compressing and stretching machine SSG 16: 3776103
DANGER!
Risk of injury caused by the use of
incorrect spare parts!
The use of incorrect or faulty spare parts may cause
risks for operating staff and damage as well as mal-func
-
tions.
- Exclusively genuine spare parts made by the man-
ufacturer or spare parts authorized by the manufac-turer
shall be used.
- Always contact the manufacturer if you are unsure.
Tips and recommendations
The manufacturer warranty shall be rendered void in
the event of a use of unauthorised spare parts.
