Assembly
SSG 16 | Version 2.01
7
7
Assembly
Set up the device where you want to work with it. Alter
-
natively, you can mount the device on a pedestal, ma
-
king sure the pedestal will withstand the device when
working.
Fig. 2: Mounting in the ground
To improve the stability of the device, the device can be
pegged in the ground.
Fig. 3: Drilling
Mount the foot pedal to the rear axle using the M10
screws.
Fig. 4: Mount the foot pedal
Put some fat on the axle.
Fig. 5: Greasing the axle
Mount the axle to the end of the foot pedal.
Fig. 6: Mount the axle
Insert the foot pedal into the rack.
Fig. 7: Mount the foot pedal
Move the foot pedal in the main unit while inserting the
screw into the corresponding opening.
Fig. 8: Inserting the screw
Hold the two M10 screws for the axle and insert the
threaded connection into the opening.
Fig. 9: Inserting the threaded connection
