Operation
SSG 16 | Version 2.01
9
Insert the jaws into the device and connect them with the
corresponding screws.
Fig. 18: Inserting the cheeks
It is very important to always use the ups and jaws to
-
gether. It is also very important to mount these as shown
in the picture. The jaws of the appliance should be oiled
weekly or according to use.
Fig. 19: Jaw
If the upsetting and stretching device is not in use, al
-
ways install the locking pin to avoid injury.
Fig. 20: Mount the locking pin
Place the unused jaws in the appropriate box. Attach the
wrench to the stand for mounting on the tripod.
Fig. 21: Storage of the cheeks
8
Operation
8.1 Operation and adjustment
Please make sure that the jaws are properly attached to
the body of the device and the body part is fixedly moun
-
ted on the associated stand. The opening and closing of
the tool teeth is only possible by pressing the foot pedal
(see exploded view). Place the sheet to be processed in
the middle of the jaws and press the foot pedal.
Note: The work carried out should be within the max. Ca
-
pacity.
DANGER!
Never press the upsetting and stretching jaws without
workpiece or Sheet metal together. This avoids da
-
mage to the jaws
DANGER!
- Always assemble upsetting and stretching jaws cor
-
rectly on the body of the device.
Wear Protective gloves
Wear Protective clothes!
DANGER!
CRUSHING! When upsetting and stretching is
always to make sure that your own security is given.
There are crushing hazards on upper limbs.
