10
RBM 1305-15 E | Version 1.02
Operation
Power box
The power box contains the controls of the machine and
is connected to the pedal.
Fig. 5: Power box
Check direction of rotation
Step 1:Turn on the main switch.
Step 2:Press the START-button.
Step 3:Press the pedals and check the direction of rota-
tion of the rollers. If necessary, the connections
must be reconnected by an electrician to obtain
the correct direction of rotation.
Step 4: Switch off the machine with the EMERGENCY
STOP button on the mobile control panel.
Step 5: Turn off the main switch.
8
Operation
WARNING!
The main power supply should be protected by cir-
cuit breakers against possible overvoltages!
ATTENTION!
The electrical box may only be opened for mainte-
nance and adjustment work!
WARNING!
Danger due to insufficient qualification of persons!
Insufficiently qualified persons can not assess the
risks involved in handling the bending machine and
expose themselves and others to the risk of serious
or fatal injuries.
- All work should only be carried out by qualified per-
sons.
- Keep inadequately qualified persons out of the
work area.
WARNING!
Risk of crushing!
The upper limbs must be kept away from the
machine during feed and during machining of the
workpiece.
ATTENTION!
- Never perform any work on the bending machine
under the influence of alcohol, drugs or medication
and / or in case of fatigue or concentration distract-
ing illnesses.
- The bending machine may only be operated by a
trained person.
ATTENTION!
Before using the round bending machine for the first time, it
is essential to lubricate the chains and bearings!
We assume no liability for damages due to improper
commissioning.
ATTENTION!
When operating the rollers: Do not drive the rollers against
the lower stop!
ATTENTION!
- The operator should have a basic knowledge of
this type of machine.
- Operators should not wear wide garments, neck-
laces, rings, etc. to prevent them from being pulled
into the running machine.
- If faults occur, the EMERGENCY STOP button must
be pressed immediately.
