2
RBM 1305-15 E | Version 1.02
Imprint
Product identification
Bending Machine
Item number
RBM 1305-15 E
3781305
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt/Bamberg
Fax:
0 951 96555 - 55
E-Mail: info@metallkraft.de
Internet: www.metallkraft.de
Indications regarding the operating instructions
Original instructions
Edition: 18.09.2019
Version: 1.02
Language: English
Author:
SN
Indications regarding the copyright
Copyright © 2019 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these operating instructions are the sole
property of the company Stürmer.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not explic-
itly permitted. Contraventions are liable to compensa-
tion.
Subject to technical modifications and error.
Content
1 Introduction................................................................................. 3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Limitation of liability ............................................ 3
2 Safety........................................................................................... 3
2.1 Symbol explanation ............................................ 3
2.2 Requirements to staff.......................................... 4
2.3 Personal protective equipment........................... 4
2.4 General safety regulations.................................. 5
2.5 Safety lables on the machine ............................. 5
3 Intended use ............................................................................... 5
3.1 Unintended use .................................................. 6
3.2 Residual risks ..................................................... 6
4 Technical Data ............................................................................ 6
4.1 Table................................................................... 6
4.2 Type plate........................................................... 6
5 Transport, packaging, storage.................................................. 7
5.1 Delivery and transport ........................................ 7
5.2 Packaging........................................................... 7
5.3 Storage ............................................................... 7
6 Description of the device........................................................... 8
6.1 Scope of delivery................................................ 8
6.2 Safety switch....................................................... 8
7 Installation and connection....................................................... 8
7.1 Installation........................................................... 8
7.2 Danger areas...................................................... 9
7.3 Lubrication of the bearing .................................. 9
7.4 Electrical connection .......................................... 9
8 Operation .................................................................................. 10
8.1 Work process.................................................... 11
8.2 Bending process .............................................. 12
9 Cleaning, maintenance and service/repair............................. 14
9.1 Cleaning and maintenance .............................. 15
9.2 Service/Repair .................................................. 15
10 Troubleshooting ..................................................................... 15
11 Disposal, recycling of used devices..................................... 16
11.1 Decommissioning........................................... 16
11.2 Disposal of lubricants ..................................... 16
12 Spare parts.............................................................................. 16
11.1 Ordering spare parts ..................................... 16
11.2 Spare parts drawing ....................................... 17
13 Electrical-schematic............................................................... 18
14 EC-Declaration of conformity................................................ 19
