Transport, packaging, storage
RBM 1305-15 E | Version 1.02
7
5
Transport, packaging, storage
5.1 Delivery and transport
Delivery
Check the bending machine on delivery for any visible trans-
portation damage. If you notice any damage to the device
please report this immediately to the carrier or dealer.
Transport
Transport with a pallet truck / forklift:
The roll bending machine is delivered on a pallet so that
it can be transported with a forklift or pallet truck.
To avoid accidents, the necessary precautions must be
taken when unloading and transporting the machine.
Transport with a crane:
The machine can be placed in a suitable location with a
crane. The machine must be attached to the crane in
accordance with the regulations.
Fig. 3: Transport with a crane
5.2 Packaging
All used packaging materials and packaging aids are
recyclable and should be taken to a materials recycling
depot to be disposed of.
The delivery packaging is made of cardboard, so
please dispose carefully by having it chopped up and
given to the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
5.3 Storage
Store the bending machine thoroughly cleaned in a dry,
clean and frost-free environment.
It must not be shut down with chemicals in a room.
If the machine must be stored in a damp room, all elec-
trical components in the control cabinet must be pro-
tected by moisture-absorbing agents.
If the machine is stored for a long time, all bare metal
parts must be greased against rusting.
ATTENTION!
When transporting or lifting the bending machine,
observe that the transport and lifting equipment can
take up the load.
WARNING!
Danger to life!
If the weight of the machine and the permissible lift-
ing capacity of the lifting equipment are not
observed during transport or lifting, the machine
may tip over or fall.
- Observe the weight of the machine and the permis-
sible lifting capacity of the lifting equipment during
transport and lifting operations.
- Check lifting gear and load handler for perfect con-
dition.
NOTE!
The machine may only be loaded and unloaded by
qualified personnel.
ATTENTION!
Before transport, check that the upper roller lock is
in the closed position and that the transport ropes
are tight.
NOTE!
- For transportation, all covers must be attached to
the machine frame.
- The machine must not be rocked during transport
by crane.
