Metallkraft 3834200, Operating Instructions Manual

10

AKM-Series 220 | Version 1.07

Description of device

5.2 Packaging

All used packaging materials and packaging aids are 
recyclable and should be taken to a materials recycling 
depot to be disposed of.

The delivery packaging is made of cardboard, so 
please dispose carefully by having it chopped up and 
given to the recycling collection.

The film is made of polyethylene (PE) and the cushioned 
parts of polystyrene (PS). Deliver these substances to a 
collection point for recyclable materials or to the waste 
disposal company which looks after your region.

5.3 Storage

Store the notching machine thoroughly cleaned in a dry, 
clean and frost-free environment. 

Apply protective oil to the upper and lower tools to pre-
vent rusting.

Protect the machine from sunlight.

Keep the machine packed in a suitable place, e.g. pro-
tected and not exposed to bad weather. If the machine 
is to be taken out of operation for a short period of time, 
clean it thoroughly and cover it with a cloth.

6 Description of device

6.1 Representation

Illustrations in these operating instructions are for basic under-
standing only and may differ from the actual version.

Fig. 7: Description of device AKM 220-4  

  1   Punching tool
  2   Angle gauge
  3   Emergency stop button
  4   Selector switch „Operating mode“ 
  5   Hydraulic ON
  6   Hydraulic OFF
  7   Foot control pedal
  8   Control lamp
  9   Main switch
 10  Emergency stop button
 11  Work table
 12  Safety cover

6.2 Scope of delivery

- Hydraulic Notching Machine
- Foot pedal
- 2 adjustable angle stops
- Internal stop
- Operating instructions
- Bottom knife set for steel
- Top knife set for steel

6.3 Accessories

- Spare knife for steel (1 set)

ATTENTION!

The machine is delivered unfilled. Before commis-
sioning, hydraulic oil must be filled into the tank.
Only use suitable hydraulic oil for refilling.