Introduction
AKM-Series 220 | Version 1.07
3
1 Introduction
You have made a good choice by purchasing the notch-
ing machine made by METALLKRAFT.
Thoroughly read the operating instructions before commission-
ing the machine.
It informs you about the proper commissioning, the in-
tended use as well as the safe and efficient operation
and maintenance of your notching machine.
The operating instructions are part the notching ma-
chine. Always keep it at the place of use the notching
machine. Furthermore, the local accident prevention
regulations and the general safety notes are applicable
for the field of application the notching machine.
The illustrations in these operating instructions serve the
general comprehension and may deviate from the ac-
tual type.
1.1 Copyright
The contents of these instructions are copyright. Their
application is admissible in the frame the notching ma-
chine utilisation. An application beyond the described
application is not allowed without written approval of the
manufacturer. For the protection of our products, we
shall register trademark, patent and design rights, as
this is possible in individual cases. We strongly oppose
any infringement of our intellectual property.
1.2 Customer service
Please contact your dealer if you have questions con-
cerning your notching machine or if you need technical
advice. They will help you with specialist information
and expert advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service :
Fax:
0049 (0) 951 96555-111
E-Mail: service@stuermer-maschinen.de
Spare part orders:
Fax:
0049 (0) 951 96555-119
E-Mail: ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and
knowledge gained from using the application-which
then could be shared and be valuable to develop our
products even further.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised taking the applicable standards and
rules, the state-of-the-art and our long-term knowledge
and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use,
- Use of untrained staff,
- Unauthorised modifications,
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the ex-
planations and presentations described here in case of
special models, when using additional ordering options
or due to latest technical modifications.
The obligations agreed in the delivery contract, the gen-
eral terms and conditions as well as the delivery condi-
tions of the manufacturer and the legal regulations at the
time of the conclusion of the contract are applicable.
2 Safety
This paragraph will give you an overview of all important
safety packages for the protection of persons as well as
for the safe and undisturbed operation. Other task-
based safety notes are included in the individual chap-
ters.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are
highlighted by symbols. The safety notes are introduced
by signal words which express the concern of the risk.
DANGER!
This combination of symbol and signal words indi-
cates an imminently dangerous situation which may
lead to death or severe injuries if they are not
avoided.
WARNING!
This combination of symbols and signal words indi-
cates a possibly dangerous situation which may
lead to death or severe injuries if they are not avoi-
ded.
Summary of Contents for 3834200
Page 32: ...www metallkraft de ...
