Technical Data
HKS 230 | Version 3.06
7
4 Technical Data
4.1 Table
4.2 Type plate
Fig. 2: Type plate HKS 230
5 Transport, packaging, storage
5.1 Delivery and transport
Delivery
Check the metal-cutting circular saw for visible transport
damage upon delivery. In case of visible damage to the
metal-cutting circular saw, immediately notify the carrier
or your retailer.
5.2 Packaging
All packaging materials and packing aids of the metal-
cutting circular saw are suitable for recycling and must
always be disposed of using material-based recycling
systems. Packaging materials made of cardboard must
be shredded and recycled as waste paper. The foils are
made of polyethylene (PE), padding is made of polysty-
rene (PS). Dispose of these substances at a recycling
centre or hand them over to a qualified waste disposal
company.
5.3 Storage
Always store the metal-cutting circular saw in a clean
condition and a dry, clean and frost-free environment. It
must not be stored in the same room as chemicals. Dur-
ing storage, the metal-cutting circular saw must be cov-
ered with a plastic film. All bare metal surfaces must be
protected with corrosion protection agent.
General data
HKS 230
Idle speed
2200 rpm
Adjustment range for an-
gled cuts
0° - 45°
Gross weight
13.6 kg
Net weight
7.1 kg
Dimensions
(L x W x H)
620 x 320 x 270 mm
Electrical data
Voltage
230 V/50 Hz
Output
1700 W
Fuse
min. 10 A
Connecting cable length
2.8 m
Cutting data
Maximum cutting depth
below 90° 80 mm
below 45° 56 mm
Saw blade data
max. perm. speed
2200 rpm
max. outer diameter
230 mm
max. saw blade width
2.4 mm
Hole diameter
25.4 mm (1")
Emissions
Noise levels
approx. 91 dB
Vibration
3.6 m/s
2
Ambient data
Transport/storage temper-
ature
0 °C - 40 °C
Deployment temperature
0 °C - 40 °C
NOTE!
Protect the metal-cutting circular saw against mois-
ture.
