2
GS 18 | Version 1.05
Imprint
Product identification
Tapping Power Tool
Article number
GS 18
3860018
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt/Bamberg
Fax:
0049 (0) 951 96555 - 55
E-Mail: info@metalkraft.de
Internet: www.metalkraft.de
Indications regarding the operating instructions
Original instructions
Edition: 15.05.2019
Version: 1.05
Language: English
Author:
FL/ES
Indications regarding the copyright
Copyright © 2019 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these operating instructions are the sole
property of the company Stürmer.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not explic-
itly permitted. Contraventions are liable to compensa-
tion.
Subject to technical modifications and error.
Content
1 Introduction .............................................................3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Limitation of liability ............................................ 3
2 Intended use ............................................................3
3 Safety........................................................................4
3.1 Symbol explanation ............................................ 4
3.2 Obligations of the operating company ............... 4
3.3 Requirements to staff.......................................... 5
3.4 Personal protective equipment........................... 5
3.5 Safety identifications on the Tapping Power Tool....6
3.6 Safety devices .................................................... 6
3.7 Special safety rules for tapping power tool ........ 6
3.8 Residual risks ..................................................... 6
4 Technical Data .........................................................6
4.1 Table................................................................... 6
4.2 Type plate........................................................... 7
5 Transport, package and storage............................7
5.1 Delivery and transport ........................................ 7
5.2 Packaging........................................................... 7
5.3 Storage ............................................................... 7
6 Description of the device........................................8
6.1 Illustration ........................................................... 8
7 Operation .................................................................9
7.1 Preparation ......................................................... 9
7.2 Electrical connection .......................................... 9
7.3 Drilling............................................................... 10
7.4 Depth stop........................................................ 11
7.5 Safety clutch..................................................... 11
8 Cleaning, maintenance and service/repair .........11
8.1 Cleaning ........................................................... 11
8.2 Maintenance..................................................... 12
8.3 Servicing.......................................................... 12
9 Disposal, Recycling of old equipment ................13
9.1 Decommission ................................................. 13
9.2 Disposal of electrical equipment ..................... 13
9.3 Disposal of lubricants ...................................... 13
10 Spare parts...........................................................13
10.1 Ordering spare parts ..................................... 13
11 Spare part drawing.............................................15
12 Electrical wiring diagram....................................16
13 EC Declaration of conformity.............................17
