Transport, package and storage
GS 18 | Version 1.05
7
* in continuous operation (For occasional thread cutting
it is possible to do cuts to 18 mm)
4.2 Type plate
The nameplate with the following data for identification as
well as the CE marking are attached to the tap (fig. 2).
Fig. 2: Type plate and CE-marking of the tap GS 18
5
Transport, package and storage
5.1 Delivery and transport
The thread cutter must be checked after delivery for vis-
ible transport damage and for completeness. If the tap
has damage or parts are missing, immediately report
this to the carrier or dealer.
5.2 Packaging
All used packaging materials and packaging aids are
recyclable and should be taken to a materials recycling
depot to be disposed of.
The delivery packaging is made of cardboard, so
please dispose carefully by having it chopped up and
given to the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
5.3 Storage
Store the tapping power tool thoroughly cleaned in a
dry, clean and frost-free environment.
It must not be shut down with chemicals in a room.
If the machine must be stored in a damp room, all elec-
trical components in the control cabinet must be pro-
tected by moisture-absorbing agents.
If the machine is stored for a long time, all bare metal
parts must be greased against rusting.
Overvoltage protection
available
Dimensions (LxBxH) [mm]
498 x 125 x 453
Weight (without side handle)
3,15 kg
Model
GS 18
