Spare parts
GS-E Series | Version 1.09
17
12 Spare parts
12.1 Ordering spare parts
The spare parts can be obtained from the authorized de-
aler.
Specify the following key data when making inquiries or
ordering spare parts:
- Device type
- Item number
- Item number
- Year of manufacture
- Quantity
- desired shipping method (mail, freight, sea, air,
express)
- Shipping address
Spare parts orders without the above information cannot
be considered. In the absence of information on the ship-
ping method, shipping will be at the discretion of the sup-
plier.
Information on the device type, article number and year
of manufacture can be found on the type plate, which is
attached to the device.
Example
The control panel for the GS 1000-12 P thread tapping
machinee must be ordered. The control panel has the
item number 5 in the spare parts drawing 1.When orde-
ring spare parts, send a copy of the spare parts drawing
with the marked component (control panel) and marked
item number (5) to the authorized dealer and provide the
following information:
Type of device:
Thread Tapping Machine
GS 1100-16 E
Item number:
4450116
Spare part drawing:
1
Position number:
5
The item number of your machine:
Thread Tapping Machine
GS 1100-16 E
4450116
GS 1200-24 E
4450124
GS 1200-36 E
4450136
DANGER!
Risk of injury due to the use of
of incorrect spare parts!
The use of incorrect or faulty spare parts can result in
danger to the operator and cause damage and mal-
functions.
- Only original spare parts from the manufacturer or
spare parts approved by the manufacturer are to be
used.
- In case of any uncertainties, always contact the ma-
nufacturer.
Tips and recommendations
Use of non-approved spare parts will void the manu-
facturer's warranty.
Summary of Contents for 4450116
Page 22: ...www metallkraft de ...
