2
GS-E Series | Version 1.09
Imprint
Product identification
Thread Tapping Machine
Item number
GS 1100-16 E
4450116
GS 1200-24 E
4450124
GS 1200-36 E
4450136
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt/Bamberg
Fax:
0049 (0) 951 96555 - 55
E-Mail:
info@metalkraft.de
Internet:
www.metalkraft.de
Information on the operating instructions
Original operating instructions
according to DIN EN ISO 20607:2019
Edition:
14.12.2021
Version:
1.09
Language: English
Author:
MS
Copyright information
Copyright © 2021 Stürmer Maschinen GmbH, Hallstadt,
Germany.
Technical changes and errors excepted.
Content
1 Introduction ............................................................. 3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Limitation of liability............................................. 3
2 Safety ....................................................................... 3
2.1 Symbol explanation ............................................ 3
2.2 Obligations of the operating company ................ 4
2.3 Personnel requirements...................................... 5
2.4 Personal protective equipment ........................... 5
2.5 Safety labels on the thread tapping machine...... 6
2.6 Safety devices .................................................... 6
2.7 Safety data sheets .............................................. 6
2.8 Special safety rules for the thread tapping
machine .............................................................. 6
3 Intended Use............................................................ 7
3.1 Reasonably foreseeable misuse......................... 7
3.2 Residual risks ..................................................... 7
4 Technical Data......................................................... 7
4.1 Table................................................................... 7
4.2 Type plate ........................................................... 8
5 Transport, packaging, storage............................... 8
5.1 Delivery............................................................... 8
5.2 Transport ............................................................ 8
5.3 Packaging ........................................................... 8
5.4 Storage ............................................................... 8
6 Description of device.............................................. 9
6.1 Representation ................................................... 9
7 Assembly ................................................................. 9
7.1 Setting the tapping direction ............................. 10
7.2 Electrical connection......................................... 10
8 Operation ............................................................... 11
8.1 Operation .......................................................... 11
8.2 Turn on/off ........................................................ 12
8.3 User interface ................................................... 12
8.4 Language settings ............................................ 13
8.5 Deep hole operation ......................................... 13
8.6 Storage and recall of workpiece parameters .... 13
8.7 User parameter................................................. 13
8.8 User parameter for lubricating and scrap
blowing.............................................................. 14
8.9 Adjusting the coupling torque of the collet
chuck ................................................................ 14
9 Cleaning, maintenance and repair....................... 14
9.1 Cleaning and maintenance ............................... 14
9.2 Overhaul of the fuse ......................................... 15
9.3 Repair ............................................................... 15
10 Disposal, recycling of old equipment ............... 15
10.1 Decommission ............................................... 15
10.2 Disposal of electrical equipment .................... 15
10.3 Disposal via municipal collection points......... 15
10.4 Disposal of lubricants..................................... 15
11 Troubleshooting.................................................. 16
12 Spare parts .......................................................... 17
12.1 Ordering spare parts...................................... 17
12.2 Spare parts drawing....................................... 18
13 Wiring Diagram Control Unit.............................. 20
14 EC-Declaration of Conformity............................ 21
Summary of Contents for 4450116
Page 22: ...www metallkraft de ...
