Introduction
GS-E Series | Version 1.09
3
1
Introduction
With the purchase of the METALLKRAFT threading ma-
chine you have made a good choice.
Read the operating instructions carefully before
commissioning.
This is an important component and must be kept close
to the machine and accessible to all users.
The operating instructions inform you about the correct
commissioning, the intended use as well as the safe and
efficient operation and maintenance of the thread cutting
machine
In addition, observe the local accident prevention regula-
tions and general safety regulations for the area of appli-
cation of the thread cutting machine
1.1 Copyright
The contents of these instructions are protected by copy-
right. Their use is permitted within the framework of the
use of the thread cutting machine. Any further use is not
permitted without the written consent of the manufactu-
rer. Forwarding and copying of this document, utilization
and communication of its contents are prohibited unless
expressly permitted. Infringements oblige you to pay da-
mages. To protect our products, we report trademarks,
Patent and design rights, if this is possible in individual
cases. We strongly oppose any infringement of our intel-
lectual property.
1.2 Customer service
Please contact your specialist dealer if you have any
questions about your threading machine or for technical
information. They will be happy to help you with expert
advice and information.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax:
0049 (0) 951 96555-111
E-Mail:
service@stuermer-maschinen.de
Spare part order:
Fax:
0049 (0) 951 96555-119
E-Mail:
ersatzteile@stuermer-maschinen.de
We are always interested in information and experiences
that result from the application and can be valuable for
the improvement of our products.
1.3 Limitation of liability
All information and notes in the operating instructions
have been compiled taking into account the applicable
standards and regulations, the state of the art and our
many years of knowledge and experience. The manufac-
turer accepts no liability for damage in the following ca-
ses:
- Non-observance of the operating instructions,
- Non-intended use,
- Use of inexperienced personnel,
- Unauthorized modifications,
- Technical modifications,
- Use of non-approved spare parts.
The actual scope of delivery may deviate from the expla-
nations and representations described here in the case
of special versions, when additional order options are
used or due to the latest technical changes.
The obligations agreed in the delivery contract, the gene-
ral terms and conditions as well as the delivery conditi-
ons of the manufacturer and the legal regulations valid at
the time of the conclusion of the contract shall apply.
2
Safety
This paragraph will give you an overview of all important
safety packages for the protection of the people using it
well as for a safe and undisturbed operation. Other task-
based safety notes are included in the individual chap-
ters.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are high-
lighted by symbols. The safety notes are introduced by
signal words which express the concern of the risk.
Summary of Contents for 4450116
Page 22: ...www metallkraft de ...
