- 25
STROKE ADJUSTMENT
In order to lock the lowering stroke ( that
means repeated bending etc. ) you must
adjust the stropper A towards side.
In order to lock the upper stroke B, use
the punch stamp with the foot pedal and
hold this in the lower position. Now lift the
foot up in order to verify the position. If
necessary, a readjustment shall be
foreseen now.
Attention:
All the adjustments to be made on the
stroke limiter, can also be carried out
by using, the leading mode. For this
purpose, the punch and / or shear
position is arranged in such a manner
that the required position is obtained
by the foot pedal and then the
stoppers are adjusted upon request.
After the adjustment process, you
must cause the machine to function
under normal tempo in order check the
stoppers.
In order to lock the back stroke of the shearing unit, use the shears with the foot pedal and hold
them in closed position. Now you can sadjust the stopper arrangement C. Then lightly lift the foot in
order to check the position. If necessary, carry out a readjustment.
