24
PRM FH | Version 1.04 | EN
Operation
9.4.1Bending of long profiles
If long profiles have to be bent, please note the following.
Fig. 18: Place long profiles on additional support surfaces
Long profiles should be placed on additional support surfaces with rollers to re-
lieve these as well as the ring bending machine (Fig. 18).
Even with a vertically installed ring bending machine, additional supporting
surfaces with rollers must be used for bending long profiles in order to avoid
overstressing the material and the ring bending machine.
9.5 Bending rolls
9.5.1Bending options with bending rollers
Tips and recommendations
At a vertically positioned ring bending machine to be bent
profiles are easier to edit than a horizontally positioned ring
bending machine.
Bending services
Profile type
maximum Size [mm]
PRM 50FH PRM
60FH
Mininmaler ben-
ding diameter
[mm]
PRM 50FH PRM
60FH
Possible bending with standard bending rollers:
35 x 35 120x25
15 x 15 50x10
600 600
300 400
60 x 10 80x15
20 x 10 40x10
600 800
300 400
10 x 15 50x50
50 x 10 20x20
600 800
300 400
60 x 7 80 x 9
30 x 4 40 x 5
800 1000
500 400
