34
PRM FH | Version 1.04 | EN
Spare parts
11.3Disposal of electrical equipment
Electrical equipment contains a variety of recyclable materials and environ-
mentally harmful components.
These components must be separated and properly disposed of. If in doubt,
contact municipal waste management.
If necessary, the help of a specialized waste disposal company can be used
for the treatment.
12 Spare parts
12.1Spare parts ordering
he spare parts can be obtained from the dealer or directly from the manufactu-
rer. The contact details are in chapter 1.2 Customer Service. Specify the follo-
wing key data for inquiries or when ordering spare parts:
- Machine type
- Item number
- Position number
- Construction year
- Amount
- Desired shipping method (post, freight, sea, air, express)
- Delivery address
Spare parts orders without above given information can not be considered. If the
shipping method is missing, shipping will be at the discretion of the supplier. In-
formation on the machine type, article number and year of manufacture can be
found on the type plate, which is attached to the machine.
Example:
The engine for the Multifunctional Inverter KOMBI 171 ED must be ordered.
The engine has the number 3 in the spare parts drawing 2.
By ordering spare parts, send a copy of the spare parts drawing (2) with the
marked part (engine) and marked positon number (3) to the dealer or spare
parts department and provide the following information:
- Type of machine:
Ring Bending Machine PRM 50 FH
- Item number:
3812036
- Drawing number:
2
- Position number:
3
DANGER!
Risk of injury by using wrong spare parts!
The use of incorrect or faulty replacement parts may cause
danger to the operator and cause damage and malfunction.
- Only use original spare parts from the manufacturer or re-
placement parts approved by the manufacturer.
- In case of doubt, always contact the manufacturer.
Tips and recommendations
It must be used bending rollers that are suitable for the
material to be processed.
