10
RBM E | Version 1.07
Technical Data
4
Technical Data
*Performance data for material with tensile strength of 400 N/mm²; conical
bending performance = factor 0.5; bending performance aluminium = 1.2; ben
-
ding performance stain-less steel (VA) = factor 0.75; the optional tempered rol
-
lers are necessary for bending stainless steel (VA) ** Please turn over for des
-
criptions of the packaging surcharges;
4.1 Type plate
The type plate with the following data for identification as well as the CE mar
-
king are attached to the round bending machine (Fig. 3).
Fig. 3: Type plate
5
Transport, packaging, storage
5.1 Delivery and transport
Delivery
Check the machine on delivery for any visible transportation damage. If you
notice any damage to the device please report this immediately to the carrier
or dealer.
Transport
RBM 1050-30 E
RBM 1270-25 E
RBM 1550-20 E
RBM 2050-15 E
Bending width
1050 mm
1270 mm
1550 mm
2050 mm
Max. sheet thickness*
3 mm
2,5 mm
2 mm
1,5 mm
Roller Ø
90 mm
90 mm
90 mm
95 mm
Bending Ø min.
135 mm
135 mm
135 mm
145 mm
Motor output (400 V)
1,1 kW
1,1 kW
1,5 kW
1,5 kW
Roller Speed
6 m/min.
6 m/min.
6 m/min.
6 m/min.
Dimensions (LxBxH) [mm]
1630x700x1200
1850x700x1200
2130x700x1200
2630x700x1200
Weight
480 kg
520 kg
580 kg
715 kg
Noise level
< 70 dB(A)
< 70 dB(A)
< 70 dB(A)
< 70 dB(A)
WARNING!
Danger to life!
If the weight of the machine and the permissible lifting capa
-
city of the lifting equipment are not observed during trans
-
port or lifting, the machine may tip over or fall.
- Observe the weight of the machine and the permissible lif
-
ting capacity of the lifting equipment during transport and
lifting operations.
- Check lifting gear and load handler for perfect condition.
