Set up and connection
RBM E | Version 1.07
17
7.5 Electrical connection
It is important to note that
- the power connection has the same characteristics (voltage, mains fre
-
quency, phase) as the motor,
- the mains voltage of 400 V is used,
- For the purpose of a safe working operation the grounding has to be
checked.
Step 1: Connect the power cord to the mains.
Step 2: Plug the pedal connector into the machine.
In some cases, a reverse connection may cause the motor to burn out. To
avoid this, after making the electrical connection, make sure that the direction
of rotation corresponds to the indicated direction of the arrow. It can also be
checked whether the rolling direction of rotation is carried out according to the
operation of the respective keys on the control panel or according to the opera
-
tion of the respective pedal; right pedal: direction of rotation right; left pedal: di
-
rection of rotation left. Possibly. If the direction of rotation is reversed, re
-
connect the cables.
Fig. 12: Insert pedal plug
DANGER!
Danger to life due to electric current!
There is an immediate danger of electrocution on contact
with live components.
- The machine may only be connected by qualified electrici
-
ans.
- Work on the electrical system should only be carried out by
qualified electricians.
DANGER!
After connecting the plug, check the direction of rotation of
the motor. If this is wrong, two phases must be exchanged.