Spare parts
RBM E | Version 1.07
31
11 Spare parts
11.1 Ordering spare parts
The spare parts may be purchased with the authorized dealer or directly with
the manufacturer. Please find the corresponding contact data in Chapter 1.2
Customer service.
Indicate the following basic information for requests or orders of spare parts:
- Type of device
- Item No.
- Position No
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air, express)
- Address of dispatch
Spare part orders which do not include the above indi-cations may not be ta
-
ken into consideration. If the indi-cations regarding the mode of dispatch are
missing, the product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item No. and year of manu
-
facture on the type plate fixed to the Machine.
Example
The top roller for the RBM 2050-15 E round bending machine must be or
-
dered. This is indicated in the spare parts drawing with the item number 5.
- Type of device: Plate rolling machine RBM 2050-15 E
- Item number: 3813204
- Position number: 5
Your order number is:
0-3813204-05
The order number consists of the item number, the position number and one
digit in front of the item number.
- Place the digit 0 in front of the item No.
- Also place the digit 0 in front of the position No 1 through 9.
DANGER!
Danger of injury due to use of wrong spare parts!
The use of incorrect or faulty replacement parts may cause
danger to the operator and cause damage and malfunction.
- Only original spare parts from the manufacturer or replace
-
ment parts approved by the manufacturer must be used.
- In case of doubt, always contact the manufacturer.
Tips and recommendations
It must be used bending rollers that are suitable for the
material to be processed.
