4
RBM E | Version 1.07
Introduction
1
Introduction
You have made a good choice by purchasing the METALLKRAFT machine.
Read the operating manual thoroughly before commissioning the ma
-
chine.
It gives you information about the proper commissioning, intended use and
safe and efficient operation and maintenance of your machine.
The operating manual is part of the Machine package. Always keep this opera
-
ting manual in the location where your Machine is being operated. All local ac
-
cident prevention regulations and general safety instructions for the operating
range of your Machine must also be complied with.
Illustrations in this operating manual serve the general understanding and may
deviate from the actual design.
1.1 Copyright
The contents of these instructions are copyright. They may be used in con
-
junction with the operation of the machine. Any application beyond those des
-
cribed is not permitted without the written approval of Stürmer GmbH.
For the protection of our products, we shall register trademark, patent and de
-
sign rights, as this is possible in individual cases. We strongly oppose any in
-
fringe-ment of our intellectual property.
1.2 Customer service
Please contact your dealer if you have questions concerning your bending ma
-
chine or if you need technical advice. They will help you with specialist infor
-
mation and expert advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax:
0049 (0) 951 96555-111
E-Mail:
service@stuermer-maschinen.de
Spare part orders:
Fax:
0049 (0) 951 96555-119
E-Mail:
ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and knowledge gained from
using the application-which then could be shared and be valuable to develop
our products even further.
1.3 Limitation of liability
All information and notes in these operating instructions were summarised
while taking applicable standards and rules, the state-of-the-art technology
and our long-term knowledge and experiences into consideration.
