2
RBM 305 | Version 2.02
Imprint
Product identification
Plate rolling machine
Item number
RBM 305
3780112
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt/Bamberg
Fax:
0049 (0) 951 96555 - 55
E-Mail:
info@metallkraft.de
Internet:
www.metallkraft.de
Indications regarding the operating instructions
Original instructions
Edition:
29.08.2018
Version:
2.02
Language: English
Author:
FL
Indications regarding the copyright
Copyright © 2018 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these operating instructions are the sole
property of the company Stürmer.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not explic
-
itly permitted. Contraventions are liable to compensa
-
tion.
Subject to technical modifications and error.
Content
1 Introduction ............................................................. 3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Limitation of liability............................................. 3
2 Safety ....................................................................... 3
2.1 Symbol explanation ............................................ 3
2.2 Requirements to staff.......................................... 4
2.3 Personal protective equipment ........................... 4
2.4 General safety regulations.................................. 5
2.5 Safety labels on the Plate rolling machine.......... 5
3 Intended use ............................................................ 5
3.1 Unintended use................................................... 6
3.2 Residual risks ..................................................... 6
4 Technical Data......................................................... 6
5 Transport, packaging, storage............................... 6
5.1 Transport ............................................................ 6
5.2 Packaging ........................................................... 6
5.3 Storage ............................................................... 6
6 Description of the Device ....................................... 7
6.1 Scope of delivery ................................................ 7
7 Assembly ................................................................. 7
7.1 Setting up the machine ....................................... 7
7.2 Hazardous Areas ................................................ 8
7.3 Lubricate bearings .............................................. 8
8 Operation ................................................................. 8
8.1 Work flow ............................................................ 9
8.2 Setting the sheet thickness................................. 9
8.3 Adjusting the guide pulley................................. 10
8.4 bending process ............................................... 10
8.5 Bending wires ................................................... 12
9 Care, maintenance and repair.............................. 12
9.1 Cleaning and Maintenance ............................... 13
9.2 Repair ............................................................... 13
9.3 Lubrication schedule......................................... 13
9.4 Troubleshooting ................................................ 13
10 Disposal, recycling of used devices ................. 14
10.1 Decommissioning ........................................... 14
10.2 Disposal of lubricants...................................... 14
11 Spare parts .......................................................... 14
11.1 Ordering spare parts....................................... 14
12 Spare parts drawing............................................ 15
13 Declaration........................................................... 16
14 Notes .................................................................... 17
