4
RBM 305 | Version 2.02
Safety
Tips and recommendations
It is necessary to observe the safety notes written in
these operating instructions in order to reduce the risk of
personal injuries and damages to property.
2.2 Requirements to staff
Qualifications
The different tasks described in this manual represent
different requirements to the qualification of the persons
entrusted with these tasks.
Only persons reliable working procedures can be ex
-
pected from, are allowed to perform all works. Persons
the responsiveness of which is affected by e. g. drugs,
alcohol or medication, are not allowed to work with the
machine.
The qualifications of the personnel for the different tasks
are mentioned below:
Operator
The operator is instructed by the operating company
about the assigned tasks and possible risks in case of
improper behaviour. Any tasks which need to be per
-
formed beyond the operation in the standard mode must
only be performed by the operator if it is indicated in
these instructions and if the operating company expres
-
sively commissioned the operator.
Electrically qualified person
Electrically qualified person is due to their professional
training, knowledge and experience as well as knowl
-
edge of the relevant standards and regulations, in a posi
-
tion to carry out work on the electrical systems and to in
-
dependently recognize and avoid possible dangers.
Qualified personnel
Due to their professional training, knowledge and experi
-
ence as well as their knowledge of relevant regulations
the specialist staff is able to perform the assigned tasks
and to recognise and avoid any possible dangers them
-
selves.
Manufacturer
Certain works may only be performed by specialist per
-
sonnel of the manufacturer. Other personnel is not au
-
thorized to perform these works. Please contact our cus
-
tomer service for the execution of all arising work.
2.3 Personal protective equipment
The personal protective equipment serves to protect per
-
sons against impairments of safety and health while
working. The staff member has to wear personal protec
-
tive equipment while performing different tasks on and
with the machine which are indicated in the individual
paragraphs of these instructions.
The personal protective equipment is explained in the
following paragraph:
CAUTION!
This combination of symbol and signal words indi
-
cates a potentially dangerous situation which may
lead to slight or minor injury if not avoided.
ATTENTION!
This combination of symbol and signal words indi
-
cates a possibly dangerous situation which may lead
to property and environmental damages if they are
not avoided.
NOTE!
This combination of symbol and signal words indi
-
cates a potentially dangerous situation which may
lead to material or environmental damage if not
avoided.
Tips and recommendations
This symbol highlights useful tips and recommenda
-
tions as well as information for an efficient and trou
-
ble-free operation.
WARNING!
Danger in case of insufficient quali
-
fication of the staff!
Insufficiently qualified persons cannot estimate
the risks while using the
machine
and expose
themselves and others to the danger of severe or
lethal injuries.
- Have all works only performed by qualified persons.
- Keep insufficiently qualified persons out of the work
-
ing area.
Eye Protection
The Eye protection protect the eyes from flying parts
and liquid splashes.
Protective gloves
The protective gloves serve to protect the hands
against sharp components as well as against fric
-
tion, abrasions or deep injuries.
