Safety
03.05.2018
page 6
Safety Plate rolling machine RBM 610-8 ; Version 1.05
©
20
18
GB
1.2
Intended Use
WARNING!
If the plate rolling machine is not used as intended
• there are risks for the personnel,
• the machine and other assets of the operator are endangered,
the function of the Machine may be impaired.
The RBM 610-8 is a plate rolling machine for the production of cylindrical and conical bends in
sheet steel and other metallic materials, as well as materials that are suitable for processing due
to their plastic deformability. Editing brittle and brittle materials is prohibited. The machine is
intended and suitable for commercial use. The workpieces must be in the form of sheet metal or
flat profiles so that they can be safely captured and transported by the rollers.
The machine may only be used as described in this manual. It may only be operated by persons
trained and trained in the use and maintenance of bending machines.
If the round bending machine is used differently than stated above, without the permission of the
company Stürmer Maschinen GmbH changed, the round bending machine is no longer used as
intended.
We assume no liability for damage due to improper use.
We expressly point out that constructive, technical or procedural changes not approved by the
company Stürmer Maschinen GmbH also invalidate the warranty.
Part of the intended use is that you
adhere to the limits of the bender,
observe the operating instructions,
comply with the inspection and maintenance instructions.
"Technical data" on page 12
WARNING!
Heaviest injuries.
Modifications and changes in the operating values of the bending machine are prohibi-
ted! They endanger people and can damage the bender.
Wear safety
shoes!
Wear a protective
suit!
Pay attention to the
protection of the
environment!
Address of the
manufacturer