Safety
03.05.2018
page 7
Safety Plate rolling machine RBM 610-8 ; Version 1.05
©
2018
GB
1.3
Dangers emanating from the round bending machine
The round bending machine corresponds to the state of the art.
Nevertheless, there is still a residual risk, because the round bending machine works with
rotating parts
We have minimized the risk to the health of persons through these hazards constructively and
through safety technology.
In the case of operation and maintenance of the bender by insufficiently qualified personnel,
dangers may arise from the bender due to incorrect operation or improper maintenance.
INFORMATION
All persons involved in assembly, commissioning, operation and maintenance must
have the required qualifications,
Pay close attention to these operating instructions.
In case of improper use
can be dangerous for the staff,
the machine and other property can be endangered,
the function of the bender may be impaired.
Always turn off the bender when performing cleaning or maintenance or stop working on it.
WARNING!
The bender may only be operated with functioning safety devices.
Switch off the bending machine immediately if you find out that a safety device is faulty
or disassembled!
All operator-side auxiliary systems must be equipped with the prescribed safety devices.
You as the operator are responsible!
"Safety devices" on page 8
1.4
Qualification of the staff
1.4.1
Target group
This manual is intended for you
the operators,
the operators,
the staff for maintenance work.
Therefore, the warnings refer both to the operation and to the maintenance of the bending
machine.
Determine clearly who is responsible for the various activities on the machine (operation, main-
tenance and repair).
Unclear competencies are a security risk!
1.4.2
Authorized persons
WARNING!
Incorrect operation and maintenance of the bending machine creates risks for people,
objects and the environment.
