18
UB 10 | Version 2.01
Spare parts
12 Spare parts
12.1 Ordering spare parts
The spare parts can be obtained from the dealer or directly
from the manufacturer. The contact details are in chapter
1.2 Customer Service. Specify the following key data when
inquiring or ordering spare parts:
- Type of device
- Item No.
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indica-
tions may not be taken into consideration. If the indica-ti-
ons regarding the mode of dispatch are missing, the pro-
duct is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of manufacture on the type plate fixed to
the Machine.
Example
The bending additive for the universal bending machine
UB 10 has to be ordered. This is indicated in the spare
parts drawing with the item number 010-070.
- Type of device:
Universal bending machine
- Item number:
3776010
- Position number:
010-070
Your order number is:
0-3776010-010-070
The order number consists of the item number, the posi-
tion number and one digit in front of the item number (0).
- Place the digit 0 in front of the item No.
- Also place the digit 0 in front of the position No. 1
trough 9.
DANGER!
Risk of injury due to incorrect spare
parts!
The use of incorrect or faulty replacement parts may
cause danger to the operator and cause damage and
malfunction.
- Only original spare parts from the manufacturer or re
-
placement parts approved by the manufacturer must be
used.
- In case of doubt, always contact the manufacturer.
NOTE!
Using non-approved spare parts voids the manu
-
facturer's warranty
