Introduction
UB 10 | Version 2.01
3
1
Introduction
You have made a good choice by purchasing the ME-
TALLKRAFT Bending machine.
Read the operating manual thoroughly before com-
missioning the machine.
It gives you information about the proper commissioning,
intended use and safe and efficient operation and main-
tenance of your bending machine.
The operating manual is part of the bending machine
package. Always keep this operating manual in the loca
-
tion where your bending machine is being operated. All
local accident prevention regulations and general safety
instructions for the operating range of your bending ma
-
chine must also be complied with.
1.1 Coypright
The contents of these instructions are copyright. They
may be used in conjunction with the operation of the de-
vice. Any application beyond those described is not per-
mitted without the written approval of Stürmer GmbH.
For the protection of our products, we shall register tra-
demark, patent and design rights, as this is possible in
individual cases. We strongly oppose any infringement
of our intellectual property.
1.2 Customer service
Please contact your dealer if you have questions con-
cerning your Bead bending machine or if you need tech-
nical advice. They will help you with specialist informa-
tion and expert advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax:
0049 (0) 951 96555-111
E-Mail:
service@stuermer-maschinen.de
Internet:
www.metallkraft.de
Spare part orders:
Fax:
0049 (0) 951 96555-119
E-Mail:
ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and
knowledge gained from using the application-which then
could be shared and be valuable to develop our products
even further.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised while taking applicable standards and
rules, the state-of-the-art technology and our long-term
knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of untrained staff,
- Unauthorised modifications
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the expla-
nations and presentations described here in case of spe-
cial models, when using additional ordering options or
due to latest technical modifications.
The obligations agreed in the delivery contract, the gen-
eral terms and conditions as well as the delivery condi-ti-
ons of the manufacturer and the legal regulations at the
time of the conclusion of the contract are applicable.
2
Safety
This section provides an overview of all major safety
pac-kages for personal protection and safe and trouble-
free operation. Further task-related safety instructions
are contained in the individual chapters.The term "ma
-
chine" below replaces the usual trade name of the object
to which these operating instructions refer (see cover
sheet).
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are high-
lighted by symbols. The safety notes are introduced by
signal words which express the concern of the risk.
DANGER!
This combination of symbol and signal words indi-
cates an imminently dangerous situation which may
lead to death or severe injury if not avoided.
WARNING!
This combination of symbol and signal words indi-
cates a potentially dangerous situation which may
lead to death or severe injury if not avoided.
